Round Polyethylene (P.E.) Feet

Budwig Polyethylene feet provide an economical alternative to our Thermoplastic Rubber feet. Recommended where resistance to sliding and shock absorbing or other rubber like qualities are not a requirement. Excellent impact resistance and good stress crack resistance. Excellent resistance to aging and most chemicals. Available in any color on special order.

*	Stock Material: Polyethylene (95 Shore A)
	Stock Colors: Black or Medium Gray
	RoHS: Compliant
*	Exception: P/N F10 1-5/8 x 2 x .150 (Key No. 5) is molded from 20 percent Calcium Carbonate filled Polypropylene.

PART NUMBER	Key No.	Height A	Diameter B	Diameter C	Recess Diameter D	Recess Depth E	Outer Wall Thickness F	Insert I.D. & Recommended Screw Size G	*Weight Capacity (per foot) in pounds
ESF10-1	1	.648	1.621	1.553	.518	.336	.130	.202 #10 Truss Head	TBD
EMF10-1	2	1.135	1.621	1.503	.518	.823	.130	.202 #10 Truss Head	TBD
ETF10-1	3	1.621	1.621	1.451	.518	1.309	.130	.202 #10 Truss Head	TBD
F10 1-5/8 x 2 x .100	4	2.000	1.625	1.485	.478	1.250	.130	.202 #10 Truss Head	TBD
F10 1-5/8 x 2 x .150	5	2.000	1.625	1.485	.478	.813	.150	.202 #10 Truss Head	TBD

*	Weight capacity for each foot using 95 shore ”A” scale durometer composition at normal room temperatures. All weight capacities are only suggested and should be tested based on individual product requirements. Other durometers are available upon special order.